Full Training Video Transcript
00:16 – Bottle4life training video
00:22 – Brought to you by Soap2o
00:29 – The optimum way to fill your soap2o bottle and dispensers
00:36 – First open your sachet box
00:45 – Look at the back of the box for information about the sachets and the instructions
00:52 – Step 1. Fill the 4L bottleflife with water, warm works best but cold works too
00:56 – Fill to the first groove on the bottle neck
1:00 – this is to allow room for agitation when shaking the bottle
1:11 – Step 2. add 4 10g sachets into the bottle4life
1:17 – 1 sachet – 1 litre
1:27 – There has to be 4 sachets, no more, no less in this sized bottle
1:34 – if you use a 2L bottle, use 2 sachets. Secure the lid back on the bottle
1:38 – Step 3. Shake and agitate
1:42 – wait for 10 minutes to allow the sachet to fully dissolve
1:50 – Step 4. Shake before use and the soap will be fully diluted and ready to use
2:04 – Step 5. The soap is ready to use. Now fill your bottles or dispensers
2:13 – 1 4L bottle4life makes up 11 elegantly eco bottles
2:23 – 14L bottle4life makes up 4 wall mounted dispensers
2:44 – The Do’s. Use the correct number of sachets for the bottle size, one sachet = one litre. Shake the bottle4life before each use. Allow he film to fully dissolve. Gloves are not necessary when handling soap but do follow PPE advice
2:53 – The don’ts. Don’t handle sachet with wet gloves/ hands. Don’t put more sachets into the botte4life until it is empty and needs a refill. Don’t over fill the bottle4life with water, room is required. Don’t throw your bottle4life away.

Short Training Video Transcript
00:01 – Step 1. Fill
00:06 – Step 2. Add
00:13 – Step 3. Shake and leave for 10 minutes
00:17 – Step 4. Shake again
00:22 – Step 5. And go